Sr20Det Shim Clearance. you are right the lifter takes up the difference. all the shims have thickness from 0.1180 to 0.1195 inch so they all have about the same thickness. whenever you have headwork done (install new valves, replace valves, seats, etc.) you must shim the valves to ensure that they are at the same. sr20det shim clearance tool. Does anyone have the nissan tool (kv10115700) or the homemade version of. In case you dont have a dealer around you who has them or. Its when you change to solid lifters you need to set a clearance. so just to clarify, the thickness of the shims located on top of the valve springs under the rockers range. measure the height of the valve with the guide in place (all of the guides are the same height), then measure the height. the following procedure will ensure that the proper size shim is installed on the shimmed valve to achieve zero. you can buy the shims through nissan for about $10 each.
from page.auctions.yahoo.co.jp
sr20det shim clearance tool. measure the height of the valve with the guide in place (all of the guides are the same height), then measure the height. you can buy the shims through nissan for about $10 each. you are right the lifter takes up the difference. all the shims have thickness from 0.1180 to 0.1195 inch so they all have about the same thickness. whenever you have headwork done (install new valves, replace valves, seats, etc.) you must shim the valves to ensure that they are at the same. In case you dont have a dealer around you who has them or. the following procedure will ensure that the proper size shim is installed on the shimmed valve to achieve zero. Does anyone have the nissan tool (kv10115700) or the homemade version of. Its when you change to solid lifters you need to set a clearance.
Yahoo!オークション NISSAN SILVIA SPEC R S15 SR20DET SHIMVALVE T...
Sr20Det Shim Clearance measure the height of the valve with the guide in place (all of the guides are the same height), then measure the height. whenever you have headwork done (install new valves, replace valves, seats, etc.) you must shim the valves to ensure that they are at the same. In case you dont have a dealer around you who has them or. you are right the lifter takes up the difference. measure the height of the valve with the guide in place (all of the guides are the same height), then measure the height. Its when you change to solid lifters you need to set a clearance. all the shims have thickness from 0.1180 to 0.1195 inch so they all have about the same thickness. so just to clarify, the thickness of the shims located on top of the valve springs under the rockers range. you can buy the shims through nissan for about $10 each. sr20det shim clearance tool. Does anyone have the nissan tool (kv10115700) or the homemade version of. the following procedure will ensure that the proper size shim is installed on the shimmed valve to achieve zero.
